LG HBM-235 bluetooth headset Manual in html

print out the pdf here http://service.velaro.com/transfer/HBM-235_User_Manual_English.pdf

LG HBM-235 Manual in html

*** Did you know LG means Lucky Goldstar? ***

Note you have to pull out the rubber cover on the charging port, you need a flat micro USB power plug

Charging
Low battery
Battery status alert

Power on
- When the charger is connected, with power on or off, the headset will turn off.
- While charging, the LED indicator will show a solid white light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the headset.
- When charging is complete, the LED indicator will turn off.


Pairing
Power off
- Press and hold the MFB for 3 seconds.
•You will hear, "power off", the Bluetooth link will disconnect and the power
will turn off.
How to use
- An announcement will play once every 2 minutes.
- If the battery is not charged, the headset will turn off.
- By pressing and holding the VOLUME DOWN button for 1 second, you can check the
battery status of the HBM-235, The audible battery status alert will inform you of the
battery level. There are 3 levels of battery status.
1. Battery is high
2. Battery is medium
3. Battery is low
- Press and hold the MFB for 3 seconds.
•The power will turn on and you will hear, "power on".
- Before using the headset for the first time, it must be paired with a Bluetoothenabled handset.
- There are 3 pairing modes with the HBM-235.
1) Easy Pairing
•Press and hold the MFB for 3 seconds to turn on the HBM-235.
•The headset will enter auto-reconnect mode for 10 seconds.
(if your headset has already been paired with the handset, the headset will
automatically reconnect to the handset when the HBM-235 is powered on).


After 10 seconds, the HBM-235 will automatically enter pairing mode.
•When the headset enters pairing mode, the LED indicator will show a solid
white light.
•Using your handset, find the Bluetooth menu and “search for” or “add” new
devices.
•Select “LG HBM-235” from the list of devices and pair it with your handset.
•If you are asked for the passkey or PIN during pairing, please enter “0000”
(4 zeros).
•Once pairing has been completed successfully, you will hear a beep.
•After pairing has been completed, make sure you "connect" to the LG
HBM-235. You will hear "Connected".
•If you want to pair with a different device in the future, the headset must be
placed into pairing mode.
•If the headset is in pairing mode for 3 minutes without being connected to
a handset, the HBM-235 will automatically turn off.
2) Manual Pairing
•With the power off, press and hold the MFB for 6 seconds.
•When the headset enters pairing mode, the LED indicator will show a solid
white light.
• Using your handset, find the Bluetooth menu and “search for” or “add” new
devices.
•Select “LG HBM-235” from the list of devices and pair it with your handset.
•If you are asked for the passkey or PIN during pairing, please enter “0000”
(4 zeros).
•Once pairing has been completed successfully, you will hear a beep.
•After pairing has been completed, make sure you "connect" to the LG
HBM-235. You will hear "Connected".
•If you want to pair with a different device in the future, the headset must be
placed into pairing mode.
•If the headset is in pairing mode for 3 minutes without being connected to
a handset, the HBM-235 will automatically turn off.
3) Proximity Pairing (Headset Initiated Pairing)
•Go into your handset Bluetooth menu and set your handset’s Bluetooth to
Visible or Discoverable mode.
•Place the HBM-235 within 4 inches (10cm) of your handset.


3) Proximity Pairing (Headset Initiated Pairing)
•Go into your handset Bluetooth menu and set your handset’s Bluetooth to
Visible or Discoverable mode.
•Place the HBM-235 within 4 inches (10cm) of your handset.
Volume control
How to use
• With the power off, press and hold the MFB on the HBM-235 for 6
seconds to enter Manual Pairing mode (solid white light).
• Press and hold the Volume Up and Volume Down buttons at the same
time for 3 seconds to place the HBM-235 in Proximity pairing Mode.
• When the headset enters Proximity Pairing mode, the LED indicator
show a solid white light.
• For 20 seconds, the HBM-235 will search for a handset that has been
placed into Discoverable or Visible mode.
• When the HBM-235 finds the handset, your handset will ask you if you
want to accept the pairing request from the HBM-235.
• Select Yes, and pair the HBM-235 with your handset.
• After your headset is paired, be sure to connect to the handset.
- If the HBM-235 is turned off (either accidentally or intentionally) while
connected to a handset, the headset and handset will disconnect.
The headset and handset will automatically reconnect when the
HBM-235 is turned back on (provided that both devices are within
the required range of 33 feet 10 meters).
[ Out of range ]
- When your handset and HBM-235 are separated by a range of 33
feet (10 meters) or more, the headset and handset will disconnect.
When the handset and HBM-235 are within the required range again,
the HBM-235 will automatically reconnect to the handset.
- If the headset and handset do not automatically reconnect when
they are back within the required range, briefly press the MFB on
the HBM-235 to reconnect manually.
- Press the VOLUME UP or VOLUME DOWN button to adjust the
speaker volume.
- There are eight levels of speaker volume.How to use
Calling Advanced multipoint
8 9
Answering a call
- When there is an incoming call, the headset will ring.
- Briefly press the MFB to answer the incoming call.
Making a call
- If you make a call from the handset, the call will (depending on the
phone settings) automatically transfer to the headset. If the call is
not automatically transferred, you can manually transfer the call by
briefly pressing the MFB on the HBM-235 (handset and headset
must be paired).
Voice dialing
- Briefly press the MFB to activate “Voice Command”.    
For best results, record the Voice dialing tag through your headset.
NOTE: If your handset does not support Voice dialing, this action
may activate Last Number Redial.
Last number redial*
- Press and hold the MFB for 1 second to activate “Last number redial”.
The headset will beep and then call the last number dialled.
Ending a call
- Briefly press the MFB.
Transferring a call*
- While on a call on your handset, briefly press the MFB to transfer the audio
to the headset (the headset and handset must be paired).
- To transfer a call from the headset to handset, press and hold the
VOLUME UP button for 3 seconds.
Call waiting*
- Answer a second call without hanging up the first call by pressing the
MFB for 1 second. Press the MFB for 1 second to return to the original call.
- Briefly press the MFB to terminate both calls at once.
Call Reject*
- Activate call reject by pressing the MFB for 1 second when the handset
rings.                          
* These functions may only be used if your handset supports them.
For further information about using these features, please consult
your handset's user manual.
How to use
The LG HBM-235 is capable of having two handsets connected to the
headset at the same time. This will give you the freedom of having only one
headset to operate both of your handsets.
Activation / De-activation
- For activation(or deactivation) advanced multipoint connection, with the
HBM-235 Discoverable mode or Not connected mode, press and hold the
MFB and VOLUME UP(or DOWN) button simultaneously for 1 second.
You will hear "On" (or "Off").
Connection
- Pair the headset with one of your Bluetooth-enabled handsets. (per the
pairing instructions on pages 6).
- Turn off the headset.
- With the power off, press and hold the MFB on the HBM-235 for 6 seconds
to enter Manual Pairing mode.
- Press and hold the MFB and VOLUME UP button on the HBM-235 for 1
second to enable Multipoint.
- Now, pair and connect the headset with your other Bluetooth-enabled
handset. (This will be your primary handset).
- Once this handset is paired and connected, go back and connect the first
paired handset to the headset. (This will be your secondary handset).
* Note: When the HBM-235 is connected to two handsets at the same
time(multipoint), the headset calling functions will work with the primary
handset (or handset which made the last outgoing call).
Calling function
- Voice dialing and Last Number Redial features work with the primary
handset (or handset which made the last outgoing call).
- The first connected device is set as the primary handset and the next
connected device is set  as the secondary handset.
- The device which made the last outgoing call will always be set as the
primary handset.
- If there is an incoming call on each handset, the first incoming call can be
answered by a brief press of the MFB.


Power on Power off Press the MFB for 3 seconds.
Power off Power on Press the MFB for 3 seconds.
Volume up Talking Briefly press the VOLUME UP button.
Volume down Talking Briefly press the VOLUME DOWN button.
Transferring a call Talking - handset to headset
Briefly press the MFB (must be paired)
- headset to handset
Press and hold the VOLUME UP button
for 3 seconds.
Answering a call Ringing Briefly press the MFB.
Ending a call Talking Briefly press the MFB.
Call waiting Talking Press the MFB for 1 second.
Last number redial Idle Press the MFB for 1 second.
Voice dialing Idle Briefly press the MFB.
(handset must support)
Call reject Ringing Press the MFB for 1 second.
Pairing mode(Manual) Power off Press the MFB for 6 seconds.
Battery status check Idle Press the VOLUME DOWN button for 1
second.
Operating Power on The white LED light flickers 4 times.
Power off The white LED light flickers 4 times
and then turns off.
Pairing mode The white LED light stays on.
Headset / Hands-free The white LED light flickers
profile connected twice every 5 seconds.
Call connected The white LED light flickers
twice every 5 seconds.
Charging Charging The white LED light stays on.
Charging complete The LED light turns off.